Cleaning and care · 6 min read

How to Descale a Breville Espresso Machine

Step-by-step descaling for the Breville Barista Express and Bambino Plus, taken from Breville’s own instruction books, plus what to do on the Barista Pro and Express Impress.

By the Kettle & Crema team · Updated November 18, 2026 · How we research

The short answer

Remove the water filter, mix Breville descaler into the tank, put the machine into descale mode with its button combination (2 CUP + POWER on the Barista Express, 1 CUP + STEAM for 5 seconds on the Bambino Plus), run the solution through the group head, steam wand and hot water outlet, then rinse with a full tank of fresh water.

Milk being steamed in a pitcher at an espresso machine

Hard water leaves limescale inside the boiler, pipes and steam wand of every espresso machine. On a Breville it shows up as slower flow, cooler shots and weaker steam, and eventually the machine tells you it is time to descale. The job takes 20 to 30 minutes and is the single best thing you can do to make the machine last.

Cleaning cycle or descale? Know the difference

Breville machines have two separate maintenance routines, and the lights are easy to confuse. The cleaning cycle uses a cleaning tablet in the portafilter to flush coffee oils from the group head. Descaling uses a descaler in the water tank to dissolve mineral scale inside the machine. Doing one does not replace the other.

ModelCleaning cycle neededDescale needed
Barista Express (BES870)CLEAN / DESCALE light flashingCLEAN / DESCALE light on solid
Bambino Plus (BES500)1 CUP and 2 CUP buttons flash alternately1 CUP and STEAM buttons and the 2 CUP button flash alternately
Barista Pro (BES878)Shown on the LCDShown on the LCD
Barista Express Impress (BES876)Maintenance lightMaintenance light

What you need

Barista Express (BES870): step by step

These steps follow Breville’s Barista Express instruction book. Before you start, take the water filter out of the tank: Breville says it must be removed before you add descaler.

  1. Check the CLEAN / DESCALE light is on solid (if it is flashing, you need a cleaning cycle instead).
  2. Dissolve one sachet of Breville descaling powder in 1 litre of water and pour it into the tank.
  3. With the machine off, press and hold the 2 CUP button, then press and hold the POWER button at the same time to enter descale mode. The POWER button flashes while the machine heats.
  4. When the POWER button, 1 CUP button, CLEAN / DESCALE light and HOT WATER / STEAM light are all on solid, it is ready.
  5. Press 1 CUP to descale the coffee side. It runs for about 25 seconds.
  6. Turn the steam dial to the steam side to descale the steam wand (about 13 seconds), then to the hot water side (about 8 seconds), then back to standby.
  7. About half the solution will be left. Repeat the 1 CUP, steam and hot water steps until the tank is used up. Do not remove or completely empty the tank during descaling.
  8. Remove and rinse the tank, fill it with fresh cold water to the 2-litre maximum, and repeat the 1 CUP, steam and hot water steps to rinse the machine through.
  9. Press POWER to leave descale mode. The lights switch off.

If you do nothing for five minutes in descale mode, the machine switches itself off. Start again from step 3.

Bambino Plus (BES500): step by step

These steps follow Breville’s Bambino Plus instruction book.

  1. Empty the drip tray and put it back in place.
  2. Fill the water tank to the DESCALE line and add the descaler to the water.
  3. Place a 2 L (68 fl oz) container under the portafilter and steam wand.
  4. Turn the machine off by pressing the 1 CUP and STEAM buttons together, and let it cool completely.
  5. With the machine off, press the 1 CUP and STEAM buttons together for 5 seconds to enter descale mode. Both buttons light up when it is ready.
  6. Press 1 CUP or STEAM to start. The buttons flash alternately while it runs.
  7. When the solution is used up, the cycle pauses. Refill the tank to the MAX line with fresh water, empty the container, and put both back.
  8. Press 1 CUP or STEAM to resume. When it finishes, the buttons flash alternately and the machine goes into standby.
  9. Empty the container, rinse the drip tray and water tank, dry them and refit them.

Barista Pro and Barista Express Impress

Breville publishes the descale steps for these models as videos on each machine’s support page rather than as text, and says the process for the Barista series works the same way: descaler in the tank, enter descale mode, run solution through the group head, steam wand and hot water outlet, then rinse with a full tank of fresh water. The Barista Pro shows the prompts on its screen. Follow your model’s video or instruction book for the exact button presses.

How often to descale

Time for a new machine? The Best Espresso Machines for BeginnersRead the guide

Common questions

How do I know my Breville needs descaling?

On the Barista Express the CLEAN / DESCALE light stays on solid (flashing means a cleaning cycle instead). On the Bambino Plus the 1 CUP and STEAM buttons and the 2 CUP button flash alternately. The Barista Pro shows it on the screen, and the Barista Express Impress lights its maintenance light.

How long does descaling a Breville take?

About 20 to 30 minutes, including the rinse with a full tank of fresh water.

Can I use vinegar to descale a Breville?

It is not recommended. Breville’s instructions are written for its own descaler, and vinegar can leave a taste and is harsh on seals. Use Breville descaler or another descaler made for espresso machines.

Is the cleaning cycle the same as descaling?

No. The cleaning cycle uses a tablet in the portafilter to remove coffee oils from the group head. Descaling uses descaler in the water tank to remove mineral scale inside the machine. Both are needed.

Related reading