Cleaning and care · 4 min read

How to Clean and Descale a Keurig

How to clean a Keurig coffee maker step by step: daily care, cleaning the needle, descaling, and fixing weak or slow brews.

By the Kettle & Crema team · Updated November 17, 2026 · How we research

The short answer

Wash the reservoir, drip tray and pod holder weekly, clear both needles with a straightened paper clip when cups come out short or weak, and descale every three to six months by brewing descaling solution through without a pod, then rinsing with a dozen water-only brews.

A single-serve coffee machine with a milk frother and a mug on a kitchen counter

Most Keurig problems, from weak coffee to short cups and slow brewing, come from two things: coffee grounds blocking the needles and limescale building up inside. Both take minutes to fix.

Every week

Cleaning the needles

There are two needles: one above the pod holder that pierces the lid, and one at the bottom of the holder. Grounds can clog both and cause short or weak cups.

  1. Unplug the machine.
  2. Remove the pod holder and use a straightened paper clip, or the cleaning tool supplied with some models, to clear the lower needle.
  3. Lift the handle and gently clear the upper needle the same way, keeping your fingers away from the sharp tip.
  4. Run one or two water-only brews to flush out loose grounds.

Descaling, every three to six months

  1. Empty the reservoir, remove any water filter and add descaling solution as the label directs.
  2. Brew repeatedly at the largest cup size, without a pod, until the machine asks for water, emptying the mug each time.
  3. Leave it to stand for at least 30 minutes with the machine on.
  4. Rinse the reservoir well, fill with fresh water and run at least a dozen water-only brews.

Many Keurig machines show a descale reminder; follow your model’s manual where it differs from these steps. Using filtered water means you will need to descale less often.

Time for a new machine? The Best Single-Serve Coffee MakersRead the guide

Common questions

Why is my Keurig only brewing half a cup?

Usually coffee grounds blocking the needles, or limescale. Clean both needles first, then descale if the problem continues.

Can I descale a Keurig with vinegar?

Many people do, but it can leave a taste that needs many rinse cycles to clear. A descaling solution made for coffee machines is the safer choice.

How often should I clean my Keurig?

Wash the removable parts weekly, clean the needles whenever brewing slows or cups are short, and descale every three to six months, or when the descale light comes on.

Related reading