Limescale from hard water builds up on every heating element. It lowers brewing temperature, slows the flow and eventually stops a machine working. Descaling regularly is the single best thing you can do to make a coffee machine last.
How often
| Water | Drip machine | Espresso machine |
|---|---|---|
| Soft | Every 3 months | Every 2–3 months |
| Medium | Every 2 months | Every 1–2 months |
| Hard | Every month | Every month |
Signs you are overdue: slower brewing, coffee that tastes flatter or cooler than usual, louder gurgling, or white deposits around the water outlet.
What to use
Use the descaler your machine’s manufacturer recommends, or a citric-acid based descaler. Vinegar works on simple drip machines but leaves a smell and can harm seals and aluminium parts, so most espresso machine makers advise against it. Check your manual first: some machines have a dedicated descaling programme.
Descaling a drip coffee maker
- Empty the carafe and remove the filter and any coffee.
- Fill the tank with descaling solution mixed as the label directs.
- Run a brew cycle halfway, switch off for 20–30 minutes, then finish the cycle.
- Run two or three full cycles of clean water to rinse.
Descaling an espresso machine
- Remove the water filter if your machine has one.
- Fill the tank with descaler solution.
- Run solution through the group head and the steam wand in short bursts, following your manual or descaling programme.
- Leave it to work for the time on the label, then rinse with at least two full tanks of fresh water through both group and wand.
Using filtered or softened water reduces how often you need to descale and improves the taste of your coffee too.


